Milling-and-vibrating-nozzles
RUMAX - |
WAMAX (1) - |
WAMAX (2) - |
WAMAX (3) - |
RDS-V (1) |
RDS-V (2) |
AVIAN
Maximum pressure 150 bar
Penetrating nozzle with with interchangeable steel (TA), carbide (TW) or chain bearing (TC) head. TC head available only for 1/2'' and 3/4'' nozzles (to be used with pipe centralizer).
Applications: rblockages, total obstructions, stones, roots (TC).
JULIA
Maximum pressure 150 bar
Milling nozzle for drains and small pipes (DN 16-30 mm). It is supplied with 3 heads: milling, drilling and round heads
Applications: limestone, hard deposits.
BARCIS
Maximum pressure 150 bar
Rodding nozzle with propeller rotating head.
Applications: roots, limestone, compact soil accumulation, obstructed pipes.
CIMOLAIS
Maximum pressure 150 bar
Propeller nozzle with carbide drilling head.
Applications:total blockages, stones, compacted soil accumulation.
WAMAX
Maximum pressure 150 bar
This hydraulic milling system is used for removal of roots, mineral deposits, concrete, protruding laterals or preliminary to pipe rehabilitation jobs. Milling head and size of cage have to be set with different tools, flanges and skids in relation to pipe conditions and diameter. Wamax 100 is supplied as set (DN 100-200 mm head and cages, tools included). Wamax 200 and 300 set up on request.
RDS-V
Working pressure: 80/150 bar
Vibrating nozzle for easy removal of light sediments at working pressure of 100/150 bar. Available with or without carbide teeth on top of the head.
Applications: limestone, concrete, mineral deposit, slag, building material. Drains and vertical columns.
RUMAX
Working pressure: 80/150 bar
Heavy hammering nozzle for easy and fast removal of silts and mineral sedimentations at low working pressure. Rumax 100 can be set with different hammer rings in relation to pipe material and conditions. Not to be used in ceramic pipes.
Applications: limestone, concrete, mineral deposit, slag, building material.
