PNE/R series
Vacuum pump, sliding vanes type, cooled by natural/surrounding air for the PNE version,
and with the addition of an air injection system for the PNR version (granting better cooling
performances on heavy duty operation). Built in vacuum/pressure changeover valve, non-
return valve, an oil tank and a pump for automatic lubrication; swivelling inlet/outlet
manifolds are included in the assembly. Drive is available at 540 (with reduction gearbox)
and 1200 rpm (direct). This pump - line has been developed for an intermittent use on
agricultural tankers and sewer cleaning equipments.

Available the following models according to the needed air flow:
- PNE/R72: 7.200 lt/min
- PNE/R82: 8.200 lt/min
- PNE/R102: 10.200 lt/min
- PNE/R122: 12.200 lt/min
- PNR142: 14.200 lt/min
Wide range of accessories for the vacuum line (recommended for the maximum protection
of the pump from accidental infiltration in its insides of liquids or solids).

LC 420 series
Vacuum pump with water cooled housing and air cooled end plates.
This particular configuration and the hollow-core rotor construction
allows to keep the weight of the pump attractively low and at the same
time a very compact overall shape. Equipped with an oil tank
(side mounted) and pump for automatic lubrication, the model LC420
includes also the 4-ways valve and check valve. The air filter is available
on request and can be bolted directly onto the pump manifold by means
of an aluminium connection. This pump is available with a direct drive
system at 1300rpm, or with speed reduction gearbox for agricultural
applications with PTO drive at 540 or 1000 rpm. Available also with
hydraulic drive. Maximum vacuum rate 92%. Suitable i.e. recommended
for continuous duty if limited at 85% vacuum rate. This pump is designed
for sewer cleaning (truck mounted) equipments, for stationary industrial
plants and for slurry tankers (mounted on agricultural trailers).

A wide range of accessories are available for the vacuum line, like for
example primary and secondary shutoffs (mild steel or stainless steel),
safety relief valves, etc. All these components are recommended for a
safe use of the pump in order to avoid accidental liquid/solids infiltration
into the pump itself.

PR series
Water cooled vacuum pump, equipped with an oil tank and pump for automatic lubrication.
This pump is available with a direct drive system, only and can be run from 900 to 1200 rpm,
depending of the model. Available also with hydraulic drive. Maximum vacuum rate 95%.
Suitable i.e. recommended for continuous duty even at high vacuum levels. Low noise level
on all models. This pump is designed for stationary industrial plants or for sewer cleaning,
truck mounted, equipment. A wide range of accessories are available for the vacuum line,
like for example vacuum/pressure changeover valve, non-return valve, air suction filter,
aluminium manifolds, primary and secondary shutoffs (mild steel or stainless steel), etc.
All these components are recommended for a safe use of the pump, avoiding accidental liquid
/solids infiltration into the pump itself.

Available the following models, according to the needed air flow:
- P620R: 8000 lt/min
- PR150: 15.000 lt/min
- PR200: 20.000 lt/min
- PR250: 25.000 lt/min
- PR330: 33.000 lt/min
- PR530: 53.000 lt/min
Wide range of accessories for the vacuum line recommended for the maximum protection of
the pump.

PN series
Vacuum pump cooled by natural surrounding air. Built-in vacuum/pressure changeover valve,
non-return valve, oil tank and pump for forced or automatic lubrication. Swivelling inlet/outlet
manifolds are included in the assembly. Drive is available at 540 (with reduction gearbox) and
1000 rpm (direct). A special version for pressure only, is also available (this is commonly used
as compressor to empty the big irrigation hose reels before transportation).
This pump - line has been developed for an intermittent use on agricultural tankers.

Available the following models, according to the needed air flow:
- PN23: 2.600 lt/min
- PN33: 3600 lt/min
- PN45: 5400 lt/min
- PN58: 6500 lt/min
- PN84: 9000 lt/min
- PN106: 11000 lt/min
Wide range of accessories for the vacuum line (recommended for the maximum protection of
the pump from accidental liquids or solids infiltration).