|
DL series
Volumetric vacuum lobe pump, lubrication-free, cooled by air injection.
Built-in vacuum/pressure changeover valve, non-return valve, injection valves,
and swivelling inlet/outlet and injection manifolds, made of aluminium.
A wide range of accessories are available, like silencers, air in-take filter, safety
valves, primary and secondary shutoffs, alarm buzzer to monitor overheating. The
work-speed is either 600 or 1000 Rpm. These pumps are designed to be mounted
on medium and large size tankers as well on industrial stationary plants. The pump
operates without contact between rotors and housing, and consequently does not
need lubrication, nor does it wear-off or emit oil mist. The maximum reachable
vacuum is 85% and the maximum pressure is 2 bar absolute.
Available a wide range of models according to the needed air flow:
- DL60: 6.670 lt/min
- DL80: 8.330 lt/min
- DL100: 10.400 lt/min
- DL120: 12.500 lt/min
- DL140: 14.750 lt/min
- DL170: 18.830 lt/min (@ 600 Rpm only)
- DL200: 20.830 lt/min (@1000 Rpm only)
Wide range of accessories for the vacuum line (recommended for the maximum
protection of the pump from accidental infiltration in its insides of liquids or solids).
|
|
PVT series rotary lobes vacuum pumps
The PVT are rotary lobe vacuum pumps, lubrication free and maintenance free.
\This is possible because there is no friction between the rotating parts and the
housing, so there is no need for oil lubrication like in the normal sliding vanes
vacuum pumps. One of the most important consequences is that these pumps do
not emit oil mist in the atmosphere, granting a clean operation and a environment
friendly machine. The PVTs do not require auxiliary cooling because those have a
built in air-injection system (fresh air from outside is sucked into the compression
chambers, cooling the pump inside) that allows continuous operation, at a wide
range of speeds.
The lobe's special profile and the skilled machining precision of the rotating &
static parts, grants high volumetric efficiency, resulting to high and improved
general performances : vacuum rate (92%) - maximum pressure of 2 bar absolute.
The PVTs are designed to meet the requirement of every single installation, thanks
to their very light weight (compared to sliding vane pump of the same capacities),
and their relatively small dimensions. Furthermore there is the possibility to order
these pumps with horizontal suction/exhaust ports as well as vertical, clockwise or
counter clockwise rotation.
Special noise debating solutions are available for industrial applications as well as
for truck mounted equipments for dry or liquid waste suction. The silenced unit is
equipped with an internal filter for injection, a non-return valve, four-way valve (to
change from vacuum to pressure), aluminium manifolds and fine filter for suction.
Available models:
- PVT 200: 760 cfm (22.000 lt/min)
- PVT 400: 1.500 cfm (40.000 lt/min)
Wide range of accessories for the vacuum line (recommended for the maximum
protection of the pump from accidental infiltration in its insides of liquids or solids).
|
