R.A. Bell & CO. A.B.N. 26 306 957 261

88-90 Berkshire Rd North Sunshine Vic 3020

Phone: 03 9311 8460 Fax:03 9311 5283

Positive displacement pumps and parts

 

Powered units

more...

 5

Low pressure compressors

more...

 1

Liquid/ Slurries transfer pumps

more...

 2

Vacuum pumps rotary lobes type

more...

 3

Vacuum pumps sliding vanes type

more...

 4

Powered units
COMBINED UNIT MOD. VJC1,8/0,8 PN33-7,5-AUX-STZ
Complete with:
- Painted mild steel tank 2,6 m3 (1,8 waste + 0,8 water), opening rear door (manual clamps,
manual opening), c/w man way for inspection and loading/discharge valves of suitable diameter.
- Vacuum pump PN33 (3600 lt/min - 92% vac) c/w suitable vacuum line
- High pressure pump 40lt/min; 70bar (7,5HP) c/w aluminium type filter
- Small pivoting hose reel 20mt x 3/8" + jetting gun 40lt x 200 bar
- Hydraulic drive c/w auxiliary petrol engine (11HP @ 3600rpm) with electric start.
This engine allows to run one pump at a time, only.
- Suitable to be installed on a 4,9 Ton GVW chassis
- Total weight (empty): 1390 kg
- Suction hose 2" x 10m.
POWERED SUCTION GROUP PN106 DIESEL
Complete with:
- PN106 vacuum pump (11000 lt/min - 92% vacuum rate), air cooled, manual vacuum/pressure
changeover
- Diesel engine (23HP @ 2700rpm) c/w electric start.
- Manual operated clutch BD110 and reduction gearbox RM45D
- Painted mild steel bearing frame.
PNR72 ELECTRIC POWERED SUCTION GROUP
Complete with:
- PNR72 vacuum pump (7000 lt/min - 93% vacuum rate), air injection cooled, manual
vacuum/pressure changeover
- Electric motor 11kW, 400V 50Hz
- Belt and pulleys drive between the pump and the electric motor
- Galvanized mild steel bearing frame.
Options:
- Vacuum line components: silencer c/w oil trap, suction filter, secondary shutoff valve
- Trolley type bearing frame.
VL 2/4 DIESEL POWERED GROUP
Complete with:
- VL2 (VL4) lobe transfer pump 200lt/min @ 5bar (400 lt/min @ 3bar)
- Diesel engine (6,5 HP @ 3000 rpm) c/w manual coil start
- Manual operated clutch c/w speed reduction gearbox (ratio 1:3)
- Galvanized mild steel bearing frame.
Options:
- Trolley type bearing frame
- Diesel engine electric start.

VL2 (VL4) ELECTRIC GROUP
Complete with:
- VL2 (VL4) lobe transfer pump 200lt/min @ 5bar (400 lt/min @ 3bar)
- Electric motor 5,5kW 6 poles, 400V 50Hz
- Direct drive to the pump via flexible joint coupling.
- Galvanized mild steel bearing frame.

VL2 (VL4) ELECTRIC GROUP WITH SPEED VARIATOR
Complete with:
- VL2 (VL4) lobe transfer pump 200lt/min @ 3,5bar (400 lt/min @ 1,5bar)
- Electric motor 4kW, 400V 50Hz
- Mechanical step less speed adjusting unit, from 200 to 1000 rpm
- Galvanized mild steel bearing frame.
Options:
- Electric control panel
- Trolley type bearing frame.

VL7 DIESEL GROUP C/WITH:
Complete with:
- VL7 lobe transfer pump 700lt/min at 5bar
- Diesel engine (19 HP @ 2700 rpm) c/w electric start
- Manual operated clutch BD110 c/w speed reduction gearbox RM45D (ratio 1:5)
- Galvanized mild steel stationary bearing frame.

VL14 DIESEL GROUP C/WITH:
Complete with:
- VL14 lobe transfer pump 1400lt/min at 4bar
- Diesel engine (23 HP @ 2700 rpm) c/w electric start
- Manual operated clutch BD110 c/w speed reduction gearbox RM45D (ratio 1:5)
- Galvanized mild steel stationary bearing frame.
Options:
- Trolley type bearing frame
- Special sealing up to 10 bar maximum pressure, with more powerful diesel engine.

VL7 ELECTRIC GROUP C/WITH:
Complete with:
- VL7 lobe transfer pump 700lt/min at 5bar
- Electric motor 7,5 kW, 400V 50Hz
- Direct drive, with speed reduction gearbox and flexible joint coupling, between the
pump and the motor
- Galvanized mild steel stationary bearing frame.

VL14 ELECTRIC GROUP C/WITH:
Complete with:
- VL14 lobe transfer pump 1400lt/min at 5bar
- Electric motor 15 kW, 400V 50Hz
- Direct drive, with speed reduction gearbox and flexible joint coupling, between the
pump and the motor
- Galvanized mild steel stationary bearing frame.
Options:
- Trolley type bearing frame
- Electric control panel with pump rotation inversion switch.

Complete with:
- VL20 lobe transfer pump 2000lt/min at 4bar
- Diesel engine (32,5 HP @ 2000 rpm) c/w electric start and fuel tank of 30 lt capacity
- Manual operated clutch BD130/50 c/w speed reduction gearbox RM70D (ratio 1:3,7)
- Galvanized mild steel stationary bearing frame.

VL27 DIESEL GROUP C/WITH:
Complete with:
- VL27 lobe transfer pump 2700lt/min at 4,5bar
- Diesel engine (50 HP @ 2000 rpm) c/w electric start and fuel tank of 30 lt capacity
- Manual operated clutch BD130/50 c/w speed reduction gearbox RM70D (ratio 1:3,7)
- Galvanized mild steel stationary bearing frame.
Options:
- Semi-trailer type bearing frame (single axle)
- Special sealing up to 7 bar maximum pressure, with more powerful diesel engine
- Silenced diesel engine (VL20 @ 3,5bar - VL27 @ 3,2bar).

VL20 ELECTRIC GROUP C/WITH:
Complete with:
- VL20 lobe transfer pump 2000lt/min at 5bar
- Electric motor 23 kW, 400V 50Hz
- Direct drive, with speed reduction gearbox and flexible joint coupling, between the
pump and the motor
- Galvanized mild steel stationary bearing frame.

VL27 ELECTRIC GROUP C/WITH:
Complete with:
- VL27 lobe transfer pump 2700lt/min at 4bar (7bar)
- Electric motor 23 kW (37 kW), 400V 50Hz
- Direct drive, with speed reduction gearbox and flexible joint coupling, between the
pump and the motor
- Galvanized mild steel stationary bearing frame (reinforced type mild steel bearing frame).
Options:
- Trolley type bearing frame
- Electric control panel with pump rotation inversion switch
- Special sealing pump, with more powerful electric motor to reach 7 bar maximum pressure.
VL 2->27 HYDRAULIC POWERED GROUP
Options available upon request:
- VITON, POLYURETHANE lobes material
- Oil control valve distributor
- Special sealing
- Suction/discharge manifolds.
COMBINED UNIT MOD. VJC 1.0/0,5 PN33-7,5-AUX-STZ
Complete with:
- Painted mild steel tank 1,5 m3 (1,0 waste + 0,5 water), closed tank, with opening manhole
on the rear bottom, c/w man way for inspection and loading/discharge valves of suitable diameter.
- Vacuum pump PN33 (3600 lt/min - 92% vac) c/w suitable vacuum line
- High pressure pump 40lt/min and 70bar (7,5HP) c/w aluminium type filter
- Small pivoting hose reel 20mt x 3/8" + jetting gun 40lt x 200 bar
- Hydraulic drive c/w auxiliary petrol engine (11HP @ 3600rpm) with electric start.
This engine allows to run one pump at a time, only.
- Suitable to be installed on a 4,9 Ton GVW chassis
- Total weight (empty): 1150 kg
- Suction hose 1 x 10m x 2".

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 
 
 
 
 
 
 
 

Copyright © BELL ENVIRONMENTAL

SOLVING YOUR PROBLEMS THROUGH PUMPING SOLUTIONS